Written by Maggie
Dec 23 2020
Dracaena Deremensis Compact is a kind of plant belonging to the Agquila family, which is the longest indoor plant in our daily life or in our company. Its leaves are relatively large, green and generous, very dignified, and the price is not very expensive. The most important thing is that it can effectively adsorb indoor formaldehyde, benzene and other harmful gases. Because of the low price of Dracaena Deremensis Compact, so many people directly use cuttings to propagate Dracaena Deremensis Compact. Here is how to propagate the Dracaena Deremensis Compact.
Time to March - October is appropriate. The cuttings, with the eyes up and slightly tilted, are inserted into the box surface to a depth of 1/2 to 2/3 of the cuttings.
Humidity of the slotting machine. Cutting substrate water content should be kept at about 60%, relative humidity should be kept at 80% to 90%, timely supplement of water. After about 15 days of callus formation, water was gradually reduced, rooting was facilitated, and ventilation was l -- 2 hours per day.
Pour water permeable once immediately after insertion, keep the temperature below substrate temperature 3-6 ℃, use film or shading network to cool down and keep wet. Generally, 20-25 ℃ is appropriate for the rooting temperature of cuttings. If the temperature exceeds 30℃, ventilation should be provided at noon and water spraying should be used to cool the temperature.
The slotting machine dispenses and fertilizes. After injection, spray 50% carbendazim 800 times liquid or 65% mancozeb in time, once every 5 days, especially after rain should be timely replenished. After rooting, the number of spraying can be reduced appropriately. After callus formation, leaf topdressing was performed once a week, followed by spraying with 0.2%-0.5% urea and potassium dihydrogen phosphate.
The cuttings can be transplanted in spring and autumn after growing on the trunk surface for 6 months and growing to 15-20 cm. Spring in February to May, autumn in September to October, choose shade density 60 to 70 percent, water, stone with moss planting place, to improve survival rate. It is better to adopt a nail cultivation method to press the root system with steel nails to clean the place where the root system is pressed, and to retain other mosses to increase the moisture content and improve the survival rate.