When it comes to the front porch ferns used to hang baskets, Kimberly queen fern is very popular. We can plant Kimberly queen fern near the entrance. It looks great and shows dark green leaves. Kimberly queen fern is neat and upright rather than spreading. It grows best all year round in a frost free climate.
Kimberly Queen Fern Quick Info
||Kimberley Queen Fern
|When to Grow/Bloom/Harvest
||Be planted in the Spring
||Reducing indoor air pollution and toxins in your home
||Partial sun to low light conditions
||Between 60 and 70 degrees Fahrenheit
||Regular moisture when planted outdoors
||Keep 25% of your potting soil
||Doesn't need pruning
||General houseplant fertilizer
||It is easily divided to form new plants
||Safe for cats and dogs
Kimberly Queen Fern Care in Detail
Kimberly Queen Fern Watering
We water Kimberly queen fern once every two or three days in the growing season to maintain air humidity and water it in the morning. In summer, we will water Kimberly queen fern once a day, place it in a ventilated place, select loose soil and let water penetrate into the roots. Water once a half month in winter to maintain soil moisture.
Kimberly Queen Fern Soil
Ferns like to grow in loose, fertile and humus soil. In courtyard cultivation, if it is loam soil, it is ideal to plant Kimberly queen fern
. If it is sandy soil, we also need to add adsorbed water substances such as peat soil in Kimberly queen fern soil to maintain soil humidity. Sandy soil is watered and fertilized frequently, but it has good aeration, and there will be no excessive salt accumulation. Silty sand has strong ability to absorb water and nutrition, but good ventilation conditions must be built. Generally, we can add some coarse organic matter, fine sand or crushed rock debris to Kimberly queen fern.
Kimberly Queen Fern Light
Direct strong light will cause the leaves of Kimberly queen fern to fade green, turn yellow or even fall off. Kimberly queen fern only needs to scatter light, afraid of refracted light or strong light, and requires a shady environment. Generally, we can place Kimberly queen fern in the bright scattered light indoor for cultivation, and can not be directly exposed to strong light.
Kimberly Queen Fern Temperature
The most suitable temperature for Kimberly queen fern during the day is 18 ~ 27 ℃, but 21 ~ 27 ℃ for some tropical species. Kimberly queen fern needs to have a certain temperature difference between day and night, and the temperature at night is about 5 ℃ lower than that in the day. Kimberly queen fern can adapt to and resist temperatures below 0 ℃ in winter.
Kimberly Queen Fern Humidity
Kimberly queen fern likes humidity and has high requirements for soil humidity and air humidity. The relative humidity of 60% - 80% is more appropriate. Too dry is easy to cause the leaves to turn yellow and fall off. We can spray water on the leaf surface to improve the air humidity. However, due to the thin leaves of Kimberly queen fern, it is easy to cause the leaves to rot and turn black.
Kimberly Queen Fern Fertilizer
Kimberly queen fern must choose the soil rich in organic matter and loose soil. The matrix can be rotten leaf soil, perlite and peat soil. We can add liquid fertilizer during the growth period of Kimberly queen fern. Nitrogen, phosphorus and potassium are particularly important for plant growth. Nitrogen can make Kimberly queen fern grow vigorously, phosphorus can make plant roots developed, and potassium can promote photosynthesis and chlorophyll synthesis. We should ensure that Kimberly queen fern is fully fertilized, so as to promote better plant growth.
Kimberly Queen Fern Pruning
Kimberly queen fern can be properly pruned during growth, maintain good shape and promote the growth of new leaves. Kimberly queen fern pruning
is very simple. They are usually pruned in early spring to promote new growth. In the process of daily maintenance, once yellow, withered or completely withered leaves are found, they shall be trimmed and cleaned in time. Once it is found that the leaves have withered, we should timely Kimberly queen fern pruning. In early spring, we should timely clean up some yellow and withered leaves in order to promote the growth of new leaves. Kimberly queen fern pruning can promote the growth of new leaves, which is also conducive to ornamental. The leaves are too old and the president is scattered. After the new leaves grow, it can maintain the health and beauty of Kimberly queen fern.
Kimberly Queen Fern Repotting
We can carry out Kimberly queen fern repotting
every two to three years. Not a plant grows in a Flower
pot all its life. When we are in Kimberly queen fern repotting, we should be careful not to damage the root. When planting a new pot, do not put the soil on the plant first, but put the plant into the pot first and put its own matched matrix in the. We can also put some broken stones at the bottom of the basin to promote drainage and facilitate root respiration.
Kimberly Queen Fern Pest & Disease Control
This Kimberly queen fern disease
is characterized by pink slime at the lesion, which mainly endangers the young leaves of the plant. The injured part of this Kimberly queen fern disease starts with small dark brown spots in the shape of water stains on the leaf edge or leaf tip, and then gradually expands from several disease spots to irregular patches, the color becomes scorched yellow, some disease spots become cloud like, and there are light red halos at the edge. In the later stage, the middle of the disease spots becomes gray white, with many small black spots. In severe cases, the whole leaf dies. This Kimberly queen fern disease will cause the top of the plant to turn brown and wilt, damaging the commercial appearance of the plant. The pathogen winters on the diseased leaves with mycelium, conidia or ascospore cavity. When the temperature rises to 20 ℃ and the relative humidity exceeds 75%, the pathogen begins to develop. The pathogen spreads through rainwater and spreads rapidly at 25 ℃ and 80% ~ 90% humidity.Prevention and Treatment:
This Kimberly queen fern disease mainly focuses on prevention. It should be sprayed for prevention in plum rain season and high temperature and high humidity season when new leaves are formed. The occurrence of this Kimberly queen fern disease can be prevented by adjusting the temperature, humidity and ventilation conditions of the greenhouse, keeping the leaves dry, preventing the introduction of diseased plants and completely removing the nearby diseased bodies. Before or at the early stage of the disease, spray once every 7 days for 2 ~ 3 times, and good results can be obtained. The effective fungicides include 75% chlorothalonil 500 times liquid, 50% carbendazim wettable powder 800 ~ 1000 times liquid or 70% tobuzin wettable powder 800 ~ 1000 times liquid. The fungicides such as Dasheng, lideco and Shibaoke also have good control effects.
2. Brown spot.
This Kimberly queen fern
disease often occurs at the top of the leaves. The injured leaves are round black spots at the beginning, and then expand into a circle or near circle. The edges of the spots are dark brown, the center is gray black and has small black spots. After that, the spots expand rapidly, and the leaves finally become black, dry and die. The main route of transmission of this Kimberly queen fern disease is fallen leaves, which may occur in spring, summer and autumn. It is easy to be popular in hot and humid seasons.Prevention and Treatment:
isolate and spray the diseased plants immediately, or cut them off and burn them in a centralized manner, and spray the drugs for protection at the same time. It can be controlled by spraying 50% carbendazim 1000 times solution, 50% methyltobuzin 1000 times solution, 200 times Bordeaux solution and other chemicals. Brown spot is also easy to occur if watering is too much or humidity is too high. At the initial stage of the disease, it can be sprayed with 300 ~ 400 times of 50% ammonium Daisen aqueous solution and 800 ~ 1000 times of 70% tobuzin wettable powder.
3. Nematode disease
The pathogen of this Kimberly queen fern disease is a white linear mollusc with two pointed ends. The diseased plant wilted and died gradually. A variety of greenhouse Ferns
are invaded by nematodes, which can be identified by reddish brown or black band lines extending from the middle rib to the leaf edge. We put a small piece of brown plaque into the water and observed it under the microscope. We can clearly see the small worms moving around.Prevention and Treatment:
we should remove the damaged leaves and eliminate their growth conditions, which is conducive to reducing the invasion of nematodes. Using insecticides such as 10% gram line phosphorus, gram line Dan or 25% C line phosphorus, covering fresh loess and irrigation with a small amount of water can significantly reduce the population density of root knot nematodes. Hot water treatment can also be used to prevent this Kimberly queen fern disease. Before planting, soak the plant in 43 ℃ hot water for 10 ~ 15 minutes.
Kimberly Queen Fern Propagation
Kimberly Queen Fern Propagation from Cutting
The plant can be used for kimberly queen fern propagation
from cuttings. Such ferns can be propagated by stem or leaf cuttings. We can directly pull off the leaves of Kimberly queen fern and put them into the soil or cut off a section of the stem. The cutting environment of Kimberly queen fern should be in a cool place to avoid sun exposure and give it a humid growth environment, which is easier to survive. We should select 1-2-year-old branches and stems without diseases and pests, truncate them to a length of 15-20 cm, keep only 3-4 leaves at the top, apply carbendazim solution to the wound, dry them in a ventilated environment, and then plant them in a mixed soil containing sandy soil, perlite, peat soil and rotten leaf soil.
Kimberly Queen Fern Propagation in Water
Kimberly queen fern can be hydroponically cultured and is relatively easy. The water exchange period is long and does not need special care. First, we should select healthy and vigorous plants, soak them in the treatment solution to eliminate bacteria, and then put them into clean water for Kimberly queen fern hydroponics in a room of about 20 degrees.
For Kimberly queen fern, we can choose a transparent cylindrical glass container because it is easy for us to observe the root system of the plant. When the root of the plant grows too strong or rots and turns black, it should be trimmed and the plant should be treated with water exchange.
Kimberly queen fern before hydroponic culture, we should soak in clean water for two days for root washing and pruning. We should pay attention to the green tender roots of the plant and be careful of damage, which will affect the survival rate of hydroponic plants. For the black old roots and rotten roots, we can prune them at will. We can dry and disinfect the container after treatment, and directly soak it in clean water.
Kimberly Queen Fern Benefits
If we propagate Kimberly queen fern
in the room, they will play the function of sponge and absorb indoor substances harmful to human health such as carbon monoxide and formaldehyde. These plants can play a good role even when there is little light.
Kimberly queen fern is evergreen all year round, or has brightly colored spores or leaves, or has unique and dazzling rhizomes. In addition, it is resistant to shade and humidity, and some kinds of stone or epiphytic special ecological habits, so Kimberly queen fern has unique ornamental characteristics.Read Next:8 Kinds of Night Blooming CereusTop 30 Fall Flowers to Plant - Beautiful Autumn FlowerBest 15 Winter Flowers for Winter GardenMing Fern (Asparagus Myriocladus) Profile: Care & Growing GuideJava Fern Care & Growing GuideBlue Star Fern Care: How to Grow & Care for Phlebodium AureumHow to Grow & Care for Asparagus FernMaidenhair Fern (Adiantum raddianum) Grow & Care GuideBirds Nest Fern (Asplenium Nidus) Profile: Info, Care & Growing GuideRabbit Foot Fern Care & Propagation Guide