Written by Maggie
Mar 31 2021
Electric shrub and hedge trimmer now is one of indispensable tools in garden tools, as the saying goes, a knife and your job. If you don't know the correct way of using the electric pruning shears, it will be difficult, even affect the service life of electric pruning shears. Now come and see the correct way of using the Electric shrub and hedge trimmer.
Do not cut branches that are beyond the working range of the scissors. Do not cut hard objects such as metal, stone and other non-plant materials. Do not hold tools with vice.
Keep the equipment clean. Use a clean cloth to clean the electric pruners, batteries and chargers (do not use any corrosive or solvent based cleaners). Use a soft brush or dry cloth to clean the dust on the head of the scissors
Do not immerse electric shrub and hedge trimmer, batteries, chargers, etc. in water or any other liquid.
Please use the electric shrub and hedge trimmer correctly according to the instructions. Please do not use the electric pruning scissors, batteries and chargers when they are damaged.
Please do not use the electric pruning shears if the switch cannot be normally switched on or off. The electric pruning shears that cannot be controlled by the switch are dangerous and need to be repaired.
Ensure that the switch is turned off during any adjustment, replacement of accessories, or storage of the electric pruner. This protective measure will reduce the risk of accidental activation of the electric pruner.
Please store idle electric pruners with the blades closed out of reach of children, and do not allow unfamiliar electric pruners or people who do not know the instructions to operate. It is dangerous for untrained users to use them.
When using electric pruning shears and accessories, follow the instructions and methods of use. At the same time, take into account the working environment and the work to be done. The use of electric pruning shears in non-compliant operations may result in hazards.
After use, moving blade and fixed blade should first remove dirt, and then lubricating oil or oil on the contact part, so that the blade is in normal maintenance state, the next use will reduce the resistance and extend the life of the blade.